Router cli commands, codes, and designations, Cli commands, C router cli commands, codes, and designations – Paradyne 9788 User Manual
Page 265: Appendix c, Router cli, Commands, codes, and designations, Router cli commands, codes, And designations
9700-A2-GB20-20
December 2002
C-1
C
Router CLI Commands, Codes, and
Designations
CLI Commands
The FrameSaver DSL Router is managed with text commands from the Command
Line Interface (CLI). The CLI can be accessed:
Locally via a PC or asynchronous terminal connected to the COM port.
Remotely via a Telnet session.
The conventions used in the command line syntax are shown below.
With the exception to the Login ID and Password, the CLI is not case-sensitive.
Interfaces, and Basic Operation, for additional information.
Convention
Translation
[ ]
Brackets indicate an optional element.
{ }
Braces indicate a required entry.
|
Vertical bars separate mutually exclusive elements. Enter one
element only.
[{ }]
Braces within brackets indicate a required choice within an optional
element.
Italics
Entry is a variable, which must be supplied by the operator.
Bold
Entry, or the minimum characters that can be entered, must be
typed as shown.
x.x.x.x
32-bit IP address and mask information where
x is an 8-bit
weighted decimal notation.
xx:xx:xx:xx:xx:xx
MAC address information where
x is a hexadecimal notation.