Configuring for network timing – Paradyne 3161 User Manual

Page 96

4. Configuration

4-42

March 2001

3160-A2-GB24-10

Configuring for Network Timing

Procedure

To configure for network timing:

1. From the top-level menu screen, select Cnfig.

2. Select the configuration option set to be copied into the Edit area by using the

appropriate Function key. Use the scroll keys, if necessary.

3. Select Edit.

4. From the Edit screen, press the

key until the Gen selection appears on the

screen.

5. Select Gen.

6. Press F1 (Next) to display the next configuration option (Clock Src).

7. Select the master clock source. For network, press F2 (note that network is

also the default).

Edit:
NET Chan Gen

Clock Src:NET
Next NET DTE

This manual is related to the following products: