Table 7-5, enterprise-specific trap definitions, Table 7-6, snmp trap per interface – Paradyne 3161 User Manual
Page 135

7. Monitoring and Troubleshooting
3160-A2-GB24-10
March 2001
7-15
Table 7-5.
Enterprise-Specific Trap Definitions
Trap Value
Event
enterpriseClockFail(1)
The currently configured master clock source has failed.
enterpriseSelfTestFail(2)
A DSU/CSU hardware failure is detected at self-test. This
trap is generated after DSU/CSU initialization.
enterpriseDeviceFail(3)
An internal DSU/CSU failure is detected by the operating
software.
enterpriseTestStart(5)
A test is initiated.
enterpriseConfigChange(6)
A configuration option is changed.
enterpriseTestClear(105)
A test is concluded.
Table 7-6.
SNMP Trap per Interface
Interface
Trap Meaning
T1 Network
Up = No alarm or test conditions.
Down = Alarm or test conditions.
DTE Drop/Insert (DSX-1)
Up = No alarm or test conditions, and the interface is
enabled.
Down = Alarm or test conditions, or the interface is
disabled.
Synchronous Data Ports
Up = No test conditions, the port is assigned to a network
interface, and both CTS and DSR are ON.
Down = Test conditions, the port is unassigned, or either
CTS or DSR is off.