Paradyne 3161 - Manual (Page 122)

7. Monitoring and Troubleshooting
7-2 March 2001 3160-A2-GB24-10
Self-Test Health Messages
Use the Self-Test Health command to display the results of the power-on self-test.
Possible messages are listed in
Table 7-1, Self-Test Health Messages . See
Chapter 2, Installation , for more information about power-on self-test.
Procedure
To display power-on self-test results:
1. From the top-level menu screen, select Stat.
2. From the Status screen, select STest.
3. View the results of the last power-on self-test. If no problems were found
during power-on, the following message appears.
F1 F2 F3
DSU ESF
Stat Test Cnfig
F1 F2 F3
Status:
DevHS STest Perf
F1 F2 F3
STest Health:
Passed