Paradyne 3161 - Manual (Page 55)

3160-A2-GB24-10 March 2001 4-1
4
Configuration
Overview
This chapter shows how to use the Control and Configuration branches of the front
panel menu for:
T Setting Customer Identification
T Changing Configuration Options
T Configuring the 10BaseT Port (Models 3160 and 3165)
T Configuring the COM Port or Modem Port for SNMP or Telnet Access
T Configuring SNMP Traps
T Configuring DS0 Channels
T Selecting the Timing Source
T Enabling the COM Port for Carrier-Mounted DSU/CSUs
T Deactivating the Alarm Relay for Carrier-Mounted DSU/CSUs
Configuration options can also be changed using the asynchronous terminal
interface (ATI). See
Appendix I, Asynchronous Terminal Interface Operation .