Paradyne 3161 User Manual
Page 201
C. Configuration Options
3160-A2-GB24-10
March 2001
C-35
Access 1: Read
Next Read R/W Prev
Access 1. Specifies the type of access allowed for Community Name 1. This is the type of
access allowed for external SNMP managers accessing objects in the MIB using
Community Name 1.
Read – Allows read-only access (SNMP Get) to the accessible objects in the MIB for this
device when community name 1 is used. This includes all objects specified as either
read-only or read/write in the MIB RFCs.
R/W – Allows read and write access (SNMP Get and Set) to the objects in the MIB for this
device when community name 1 is used. Write access is allowed for all objects specified
as read/write in the MIB RFCs. Read access is allowed for all objects specified as either
read-only or read/write.
CommunityName2:
Next Edit Clear Prev
Community Name 2. Specifies the second of two community names that are allowed to
access this unit’s Management Information Base (MIB). External SNMP managers must
supply this name to access an object in the MIB.
Edit – Allows you to edit or display the second community name.
Clear – Allows you to clear the second community name.
Access 2: Read
Next Read R/W Prev
Access 2. Specifies the type of access allowed for Community Name 2. This is the type of
access allowed for external SNMP managers accessing objects in the MIB using
Community Name 2.
Read – Allows read-only access (SNMP Get) to the accessible objects in the MIB for this
device when community name 2 is used. This includes all objects specified as either
read-only or read/write in the MIB RFCs.
R/W – Allows read and write access (SNMP Get and Set) to the objects in the MIB for this
device when community name 2 is used. Write access is allowed for all objects specified
as read/write in the MIB RFCs. Read access is allowed for all objects specified as either
read-only or read/write.
IP Adr:
Next Edit Clear Prev
IP Address for the DSU/CSU. Specifies the IP address needed to access the DSU/CSU.
Since this IP Address is not bound to a particular port, it can be used for remote access
via the FDL or EDL management link.
Edit – Allows you to edit and/or display the IP address for the DSU/CSU.
Clear – Allows you to clear the IP address for the DSU/CSU. The IP address is set to
000.000.000.000.
Table C-9.
General Management Configuration Options (3 of 7)