Paradyne 3161 - Manual (Page 254)

F. SNMP MIB Objects
F-14 March 2001 3160-A2-GB24-10
SNMP Group, MIB II
The SNMP Group objects that apply to a management agent are fully supported
by the DSU/CSU. The following objects apply only to an NMS and return a zero
value if accessed.
T snmpInTooBigs (snmp 8)
T snmpInNoSuchNames (snmp 9)
T snmpInBadValues (snmp 10)
T snmpInReadOnlys (snmp 11)
T snmpInGenErrs (snmp 12)
T snmpInGetResponses (snmp 18)
T snmpInTraps (snmp19)
T snmpOutGetRequests (snmp 25)
T snmpOutGetNexts (snmp 26)
T snmpOutSetRequests (snmp 27)
DS1/E1 MIB (RFC 1406)
The “ds1” object defined by RFC 1406 is supported for both the network and DTE
Drop/Insert (DSX-1) interfaces. The DS1 Near End Group and DS1 Fractional
Group are supported for both interfaces. The DS1 Far End Group is not supported.
Near End Group, DS1/E1 MIB
The DS1 Near End Group consists of the following four tables:
T DS1 Configuration
T DS1 Current
T DS1 Interval
T DS1 Total
All four tables are fully supported for the network interface. Since statistics are not
kept for the DTE Drop/Insert (DSX-1) interface, only the DS1 Configuration table is
fully supported. The “statistic” objects for the DTE Drop/Insert (DSX-1) interface
entry in the DS1 Current, DS1 Interval, and DS1 Total tables are always zero
(null). The following sections provide clarification for objects contained in the Near
End Group when it is not clear how the object definition in the DS1/E1 MIB is
related to the DSU/CSU.