Paradyne 3161 - Manual (Page 314)

Index
IN-4 March 2001 3160-A2-GB24-10
LEDs, front panel
during power-up self-test, 2-10
functional description, 3-5
lamp test, 8-21
physical description, 1-3, 3-1
line coding, C-2
line equalization, C-2
line loopback (LLB), 8-9
link layer protocol, 4-13, 4-17
link trap, 7-14
liquid crystal display (LCD)
failure message, 7-3
functional description, 3-2
physical description, 1-3, 3-1
LOF (Loss Of Frame) condition
front panel LED indication, 3-7–3-8
LOFC (Loss Of Frame Count) report, 7-11
loopback
front panel LED indication, 3-6
local, 8-8
abort, 8-15
data channel loopback (DCLB), 8-13
data terminal loopback (DTLB), 8-14
DTE loopback (DLB), 8-11, C-3, E-3
line loopback (LLB), 8-9
payload loopback (PLB), 8-10
repeater loopback (RLB), 8-12
remote, 8-5
LOS (Loss Of Signal) condition
ASCII terminal/printer message, 7-13
Device Health and Status message, 7-5
front panel LED indication, 3-7–3-8
Performance Report message, 7-11
Self-Test Health message, 7-3
troubleshooting, 7-16
Lpbk (Local Loopback) branch
example of use, 8-8
M
maintenance
device health and status, 7-4
performance reporting, 7-6
power-up self-test, 2-11, 7-2
manager
SNMP, 1-3
master clock
functional description, 4-40
procedure for configuring, 4-42
messages
alarm
Performance Report, 7-10
Self-Test Health, 7-3
troubleshooting, 7-16
with ASCII terminal/printer, 1-2, 7-13
status
Performance Report, 7-10
Self-Test Health, 2-10, 7-3
Test Status, 8-23
MIBs, F-1
modem
Dial command, 6-6
Disconnect command, 6-7
disconnect using front panel keys, 6-8
integral, 6-1
phone directory, 6-2
MODEM Port
acquiring/releasing the user interface, 5-5
configuration option, C-24
functional description, 1-2, 1-7
physical description, 1-5–1-6
pin assignments, E-5
technical specifications, B-2
used with ASCII terminal/printer, 7-13
used with SNMP system, 4-14
Mon (Monitor) branch
example of use, 8-4
N
NET (Network) Configuration branch
example of use, 4-5
option table, C-8
option worksheet, D-2
network interface
cabling example, 2-9
channel allocation procedure, 4-24
configuration options, C-8
failure message, 7-3
front panel LED indications, 3-7
functional description, 1-7, 2-1
physical description, 1-5–1-6
pin assignments, E-1
technical specifications, B-2
troubleshooting, 7-16
O
objects
SNMP, 1-3, F-1
OOF (Out Of Frame) condition
ASCII terminal/printer message, 7-13
Device Health and Status message, 7-5
front panel LED indication, 3-7–3-8
Performance Report message, 7-10
troubleshooting, 7-17
options
configuration options tables, C-1