Paradyne 3161 - Manual (Page 113)

3160-A2-GB24-10 March 2001 6-1
6
Using the Integral Modem
Using the Integral Modem in Standalone DSU/CSUs
The standalone DSU/CSU’s integral modem enables your DSU/CSU to
communicate with remote devices to display alarm messages or to function as the
user interface. The carrier-mounted DSU/CSU does not have an integral
modem.
The Call command, available from the Control branch of the menu tree, provides
the following functions to initiate and terminate modem connections:
T Pass – Initiates a call through the integral modem to access a far-end
DSU/CSU’s front panel from your DSU/CSU’s front panel (or PC attached to
the COM port).
T Dial – Initiates a call through the integral modem to a printer, ASCII terminal,
or PC. Sets up a semipermanent connection to route alarm messages to the
specified destination.
T Disconnect – Disconnects an active modem connection.
T Change Directory – Allows entry of phone numbers into the internal phone
directories.
For additional information, refer to User Interface Configuration Options in
Appendix C, Configuration Options.