Paradyne 3161 - Manual (Page 258)

F. SNMP MIB Objects
F-18 March 2001 3160-A2-GB24-10
Near End Group – The DS1 Interval Table Objects (dsx1IntervalEntry)
The following DS1 interval table objects are provided for the network interface only.
Objects in the table that are not listed are not supported and will return an error
status if access is attempted.
T dsx1IntervalIndex – The index that identifies the T1 interface.
T dsx1IntervalNumber – The interval number (1 to 96).
T dsx1IntervalESs – Errored Seconds for the interval.
T dsx1Interval SESs – Severely Errored Seconds for the interval.
T dsx1IntervalUASs – Unavailable Seconds for the interval.
T dsx1IntervalCSSs – Controlled Slip Seconds for the interval.
T dsx1Interval BESs – Bursty Errored Seconds for the interval.
Near End Group – The DS1 Total Table Objects (dsx1TotalEntry)
The following DS1 total table objects are provided for the network interface only.
Objects in the table that are not listed are not supported and will return an error
status if access is attempted.
T dsx1TotalIndex – The index that identifies the T1 interface.
T dsx1TotalESs – The 24-hour total Errored Seconds.
T dsx1Total SESs – The 24-hour total Severely Errored Seconds.
T dsx1TotalUASs – The 24-hour total Unavailable Seconds.
T dsx1TotalCSSs – The 24-hour total Controlled Slip Seconds.
T dsx1TotalBESs – The 24-hour total Bursty Errored Seconds.
Far End Group, DS1/E1 MIB
The DS1 Far End Group consists of the following three tables:
T DS1 Far End Current
T DS1 Far End Interval
T DS1 Far End Total
These tables are not supported for either the network or DTE Drop/Insert (DSX-1)
interface.