Paradyne 3161 User Manual
Page 37
2. Installation
3160-A2-GB24-10
March 2001
2-11
If the self-test fails, the Failed screen appears for five seconds. The Fail LED
lights, and an 8-digit failure code (xxxxxxxx) is displayed for use by service
personnel to determine the cause of the self-test failure. The DSU/CSU
continues to try to operate. If you are in doubt about the results of the self-test,
use the Self-Test Health command to display the status of this test (see
in Chapter 7, Monitoring and Troubleshooting).
4. The top-level menu screen appears.
F1
F2
F3
Self-Test:
Failed xxxxxxxx
F1
F2
F3
DSU ESF
Stat Test Cnfig
This manual is related to the following products: