Displaying unit identity – Paradyne 3161 User Manual
Page 48
3. Using the Front Panel
3-10
March 2001
3160-A2-GB24-10
Displaying Unit Identity
The identity of the DSU/CSU (serial number, model number, software revision
level, hardware revision level, and customer identification) is available through the
Status branch of the front panel menu (see
).
The customer identification is the only identity number you can change.
NOTE:
The following procedures are examples only. Screen displays may vary
depending on the model of the DSU/CSU.
Procedure
To display the DSU/CSU’s identity (ID):
1. From the top-level menu screen, select Stat.
2. From the Status screen, press the
key until the ID selection appears on the
screen.
3. Select ID.
F1
F2
F3
DSU ESF
Stat Test Cnfig
F1
F2
F3
Status:
TStat LED ID
This manual is related to the following products: