Perle Systems RIO 5500036-17 - Manual (Page 85)

RIO Remote I/O System User Guide
Installing RIO under SCO UnixWare
Page 85
Chapter 2 Installing hardware and software
10.If you are happy with the configuration settings press the ESC key to close the window.
Otherwise, repeat step 4. onwards of this procedure to change the configuration as
required.
11.Press the Esc key twice
A prompt window is now displayed asking you if you want to save changes before exiting
config.rio.
12.In the prompt window, select Yes and press the Enter key.
The config.rio utility now closes down and the system is updated to use your new
configuration.
Note
The changes you have made to the system configuration will not take
effect until you exit the config.rio utility.
Hint
To save and update the configuration changes without exiting proceed as follows;
• In the Main Menu, click on Update configuration file .