Selecting the rta and port to test, Selecting the, Rta and port to test – Perle Systems RIO 5500036-17 User Manual
Page 281
RIO Remote I/O System User Guide
SCO OpenServer 5 troubleshooting
Page 281
Selecting the RTA and port to test
To select the RTA and port to you wish to test proceed as follows:
1. Turn on your system and login as super user.
2. At the command prompt, type
config.rio
and press the
Enter
key.
The RIO configuration utility window is now displayed showing a map of your system. See
Configuring ports with config.rio
for more details about how
config.rio
works.
3. In the RIO configuration utility window, move the cursor to the RTA associated with the
ports you want to test and press the
Enter
key.
The RTA Management menu is now displayed.
Note
You should disable any port service active on the port before running
the diagnostics.
RTA
Host card
Link cable