Perle Systems RIO 5500036-17 - Manual (Page 64)

RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 64
Chapter 2 Installing hardware and software
Configuring ports with config.rio
Under the SCO OpenServer operating system, RIO includes an application for configuring
ports called
config.rio . Config.rio provides a real time map of your system showing the
Remote Terminal Adaptors, link cables and host cards and so forth that make up your
system.
Any changes you make to your RIO system are automatically updated on the system map.
For details of using config.rio, see the following;
• Adding an RTA to the system on page 65
• Removing an RTA from the system on page 69
• Creating a login for an RTA on page 72
Remote Terminal Adaptor (RTA).
Highlight an RTA icon and press
the
Enter key to display the
RTA Management Menu.
See
page 232 .
Host card. Highlight a host card icon and
press the
Enter key to display the
Host Configuration menu. See page 232 .
Link cable
Click here or type M to display
Main Menu .
See page 228 .