Perle Systems RIO 5500036-17 - Manual (Page 49)

RIO Remote I/O System User Guide
Installing RIO under Solaris
Page 49
Chapter 2 Installing hardware and software
Removing RIO serial port terminals
To remove any RIO serial ports configured as terminals proceed as follows;
1. In the Solaris desktop, single click on the Application Manager toolbar icon shown in the
next picture.
The Application Manager window is now displayed.
2. In the Application Manager window, double click on the System_Admin folder.
The System_Admin window is now displayed.
3. In the System_Admin window, double click on the Admintool icon.
The main Admintool window is now displayed as shown in the next picture.
Double click here to start
Application Manager.