Identifying pci rtas – Perle Systems RIO 5500036-17 User Manual
Page 122

RIO Remote I/O System User Guide
Installing RIO PCI Host Cards under Windows 2000/XP/Server 2003/Vista/Server 2008
Page 122
Chapter 2 Installing hardware and software
Identifying PCI RTAs
RIO allows you to identify RTAs by flashing the the LEDs on selected units. You can so this
for both single and multiple RTAs. To identify and RTA in this manner proceed as follows:
1. Click the
Start
button
> Control Panel
The control panel window is now displayed.
2. In the Control Panel window, click on the
System
icon.
The System Properties tabbed window is now displayed.
3. In the System Properties window, click on the
Hardware
tab.
The hardware page is now displayed.
4. In the Hardware page, click on the
Device Manager
Button.
The Device Manager window is now displayed.