Perle Systems RIO 5500036-17 User Manual
Page 231
RIO Remote I/O System User Guide
SCO OpenServer 5 utilities
Page 231
Chapter 4 Quick Reference
(continued)
Note this option is
only displayed after
the selected RTA has
been configured.
Store settings
Maintains the hardware
characteristics of the line across port
closes and reboots when enabled.
Default value is No (don’t store
settings).
Drain settings
Forces a port to wait until all data has
been drained before closing when
enabled
When using this setting beware that a
process may appear to be hung while
it is waiting for all the data to be output
before the close.
Resume output
Resumes output on a device that has
hung.
Show port settings
Displays the stty and special RIO
attributes set on the currently selected
port.
Show modem pin settings
Displays the status of the modem pins
on the selected port.
Port diagnostics
Runs the port diagnostics facility and
displays the port diagnostics window.
See also
Port
statistics >
Gather port
statistics
Gathers statistics on the selected
ports.
See also
Reset port
statistics
Resets the ports statistics counts.
See also
Show port
statistics
Displays statistics for the currently
selected ports.
See also
Edit ID Name
Allows you to change the host ID
name.
Re-boot RTA
Reboots the selected RTA.
Zombie RTA
Isolates an RTA from the system
without physically disconnecting it.
Once this option has been performed
on an RTA it will need to be re-booted
before it can be used again.
Identify RTA
Flashes the LEDs on the selected
RTA in a unique pattern to allow
identification.
Menu option
Description