Perle Systems RIO 5500036-17 - Manual (Page 62)

RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 62
Chapter 2 Installing hardware and software
Removing device drivers and utilities from your system
To remove the RIO device drivers and utilities for the SCO OpenServer operating system
proceed as follows;
1. In the SCO OpenServer desktop, double click on the System Administration folder.
The System Administration window is now displayed.
2. In the System Administration window, double click on the software manager icon.
The Software Manager window is now displayed.
3. In the Software Manager window select the driver you want to remove.
4. In the Software Manager menu, click on Software > Remove software .
A confirmation window is now displayed prompting you to confirm removal