Perle Systems RIO 5500036-17 - Manual (Page 151)

RIO Remote I/O System User Guide
Installing RIO under Linux
Page 151
Chapter 2 Installing hardware and software
Loading the RIO module and firmware automatically
1. To automatically configure the start up files to load the rio module and firmware, copy the
following script to the file /etc/rc.d/init.d/rio.
2. Create symbolic links to the file in the relevant system start-up directories ( page 152 ).
#!/bin/sh
#
# rio This shell script takes care of starting and stopping
# the RIO services.
#
# probe: true
# Source function library.
. /etc/rc.d/init.d/functions
#
# Exit if the rio utilities are not present
#
[ -f /usr/sbin/rioboot ] || exit 0
# See how we were called.
case "$1" in
start)
# Start driver and load module.
action "Starting RIO services: " /sbin/modprobe rio
echo -n "Starting RIO Firmware: "
#
# If we have a rio.cf file then just rioboot
#
if [ -f /etc/rio/rio.cf ]; then
daemon /usr/sbin/rioboot
else
daemon /usr/sbin/rioboot -f
fi
echo
;;
stop)
# Stop driver and unload module.
action "Shutting down RIO services: " /sbin/modprobe -r rio
echo
;;
status)
status rio
;;
restart|reload)
$0 stop
$0 start
;;
*)
echo "Usage: rio {start|stop|restart|reload|status}"
exit 1
esac
exit