beautypg.com

Setting up a gps device – Palm Treo 700w User Manual

Page 205

background image

Using Your Treo 700w Smartphone

197

System settings

CHAPTER 9

If your smartphone is connected to your computer when you send the
error report, you are not billed for sending error reports—provided your
computer is connected to the Internet. If you use the Verizon Wireless
network to send an error report, data transfer charges apply.

1.

Press Start

and select Settings.

2.

Select the System tab, and then select Error Reporting

.

3.

Select whether you want to enable or disable error reporting.

4.

Press OK

to finish.

Setting up a GPS device

If you purchased an optional Global Positioning System (GPS) receiver,
your smartphone can show your exact location on a map.

1.

Press Start

and select Settings.

2.

Select the System tab, and then select GPS

.

3.

On the Programs tab, select the GPS program port list, and then
select the port for applications to use to access GPS info. This port
must also be selected in your GPS application’s configuration
settings.

4.

Select the Hardware tab.

5.

Select the GPS hardware port list, and then select the port to which
your GPS receiver is connected. This must be a different port from
the one you set in step 4 as your program port. To connect to the
GPS device using a Bluetooth connection, you must first set up a
partnership between the two devices (see “Setting up a Bluetooth
connection” on page 110.)