Palm Treo 700w - Manual (Page 16)

8 Using Your Treo 700w Smartphone
CHAPTER 1 Setting up your smartphone and computer
Installing the battery
1. Use one hand to press the battery door release and use the
other hand to slide the battery door downward to remove it
from your smartphone.
2. Align the battery contacts with the phone contacts inside
the battery compartment.
3. Insert the battery into the compartment at a 45-degree
angle and then press it into place.
4. Slide the battery door onto the back of the smartphone
until it clicks into place. Your smartphone screen turns on
and the Treo screen appears. Wait for the progress bar on
the Treo screen to fill and the Windows Mobile screen to
appear.
5. Follow the onscreen instructions to finish the installation.
Tip
If your smartphone
does not turn on after
inserting the battery,
you need to connect it
to the AC charger to
charge it. If it still
doesn’t start, do a soft
reset. See
“Performing a soft
reset” on page 213.
Tip
You can buy an extra
battery as a spare for
long airplane trips or
periods of heavy data
use. Be sure to use
batteries from Palm
only.
Battery door
release
Reset
button
Phone
contacts
Battery
contacts