Planet Technology WGSD-8000 - Manual (Page 71)

User’s Manual of WGSD-1022/WGSD-8000
- 71 –
• ACL Name
Displays the user-defined MAC based ACLs
• New ACL Name
Specifies a new user-defined MAC based ACL name.
• Delete ACL
By which deletes the selected ACL
• Action
Indicates the ACL forwarding action. Possible field values are:
• Permit, by which forwards packets which meet the ACL criteria.
• Deny, drops packets which meet the ACL criteria.
• Shutdown, where drops packet that meet the ACL criteria, and disables the
port to which the packet was addressed.
• Source MAC
Address
Matches the source MAC address to which packets are addressed to the ACE.
• Wildcard Mask
Defines the source IP address wildcard mask. Wildcard masks specify which bits
are used and ignored.
A wild card mask of 255.255.255.255 indicates that no bit is important.
A wildcard of 0.0.0.0 indicates that all the bits are important.
For example, if the source IP address 149.36.184.198 and the wildcard mask is
255.36.184.00, the first eight bits of the IP address are ignored, while the last eight
bits are used.
• Dest. MAC Address Where matches the destination MAC address to which packets are addressed to
the ACE.
Wildcard Mask, which defines the destination IP address wildcard mask.
• VLAN ID
Which matches the packet’s VLAN ID to the ACE.
The possible field values are 2 to 4094.
• Ether Type
Where specifies the packet’s Ethernet type.
Use the “ Add to List ” button to add the configured MAC Based ACLs to the MAC Based ACL Table at the bottom of the
screen.
4.6.4 MAC Based ACL Configure Sample
This chapter will teah you how to configure a MAC based ACL in the WGSD-Switch.
■ Sample Case: Deny IP packets to specific Class C network
¾ Purpose: