Planet Technology WGSD-8000 - Manual (Page 199)

User’s Manual of WGSD-1022/WGSD-8000
- 199 –
!!!!! [OK]
Copy took 0:0:23 [hh:mm:ss]
5.6.4 show startup-config
The show startup-config privileged EXEC command displays the startup configuration file contents.
Syntax
show startup-config
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the contents of the startup-config file.
Console# show startup-config
software version 1.1
hostname device
interface ethernet 1/1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
interface ethernet 1/2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000