Planet Technology WGSD-8000 - Manual (Page 222)

User’s Manual of WGSD-1022/WGSD-8000
- 222 –
User Guidelines
There are no user guidelines for this command.
Example
The following example clears all the GVRP statistics information on port e8.
Console# clear gvrp statistics ethernet e8
5.8.8 show gvrp configuration
The show gvrp configuration User EXEC command displays GVRP configuration information, including timer values, whether
GVRP and dynamic VLAN creation is enabled, and which ports are running GVRP.
Syntax
show gvrp configuration [ethernet interface | port-channel port-channel-number]
ƒ interface — A valid Ethernet interface.
ƒ port-channel-number — A valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to display GVRP configuration information:
Console# show gvrp configuration
GVRP Feature is currently enabled on the switch.
Maximum VLANs: 255,
Port(s) GVRP Registration Dynamic Timers Leave Leave
Status VLAN (milliseconds) All
Creation Join
-------- ------------- ---------------- --------------- --------------------- ---------------- -------------
e1 Enabled Normal Enabled 200 600 10000
e4 Enabled Normal Enabled 200 600 10000