Planet Technology WGSD-8000 - Manual (Page 173)

User’s Manual of WGSD-1022/WGSD-8000
- 173 –
Default Configuration
Forward
Command Modes
Interface configuration (VLAN) mode
User Guidelines
If routers exist on the VLAN, do not change the unregistered multicast addresses state to drop on the routers
ports.
Examples
This example enables forwarding unregistered multicast addresses within VLAN 8.
console (config)# interface vlan 8
console (config-if)# bridge multicast forward-unregistered add ethernet 1- 9
5.4.6 bridge multicast forbidden forward-unregistered
The bridge multicast forbidden forward-unregistered interface configuration command forbids a port to be a
Forwarding-unregistered-multicast-addresses port. Use the no form of this command to return to default.
Syntax
bridge multicast forbidden forward-unregistered {add | remove} {ethernet interface-list | port-channel portchannel-
number-list }
no bridge multicast forbidden forward-unregistered
ƒ add — Forbid forwarding unregistered multicast packets.
ƒ remove — Don’t forbid forwarding unregistered multicast packets.
ƒ interface-list — Separate nonconsecutive Ethernet ports with a comma and no spaces; use a hyphen to designate a
range of ports. (Range: Valid Ethernet port)
ƒ port-channel-number-list — Separate nonconsecutive port-channels with a comma and no spaces; use a hyphen to
designate a range of port-channels. (Range: Valid Port-channel number)
Default Configuration
Not forbidden
Command Modes
Interface configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.