Planet Technology WGSD-8000 - Manual (Page 45)

User’s Manual of WGSD-1022/WGSD-8000
- 45 –
Figure 4-10 Create VLAN screen
The page contains the following fields:
„ Single VLAN
• VLAN ID (2-4094)
You can configure the ID number of the VLAN by this item. Up to 256 VLANs can be
created. This field is used to add VLANs one at a time. If you want to add the
defined VLAN ID number, you can press the Add button.
• VLAN Name Where shows the user-defined VLAN name
• VLAN Range Indicates a range of VLANs configured. To add the defined range of VLAN ID
numbers, press the Add Range button
„ VLAN Table
The VLAN Table displays a list of all configured VLANs, include the
• VLAN ID,
• VLAN Name,
• Status
To remove a VLAN, click the Remove button.
4.4.2 Port setting
In this port setting screen (refer to figure 4-11), the parameters managing ports that are part of a VLAN will be provided, and you
can set the default VLAN ID (PVID). All untagged packets arriving to the device are tagged by the ports PVID.
Figure 4-11 VLAN Port Setting screen
The page contains the following fields: