Planet Technology WGSD-8000 - Manual (Page 186)

User’s Manual of WGSD-1022/WGSD-8000
- 186 –
The end time is relative to summer time. If the starting month is chronologically after the ending month, the system assumes that
you are in the southern hemisphere.
USA rule for daylight saving time:
Start: First Sunday in April
End: Last Sunday in October
Time: 2 am local time
EU rule for daylight saving time:
Start: Last Sunday in March
End: Last Sunday in October
Time: 1.00 am (01:00) Greenwich Mean Time (GMT)
Examples
The following example sets summer time starting on the first Sunday in April at 2am and finishing on the last Sunday in October
at 2 am.
Console (config)# clock summer-time recurring first sun apr 2:00 last sun oct 2:00
5.5.5 sntp authentication-key
The sntp authentication-key global configuration command defines an authentication key for Simple Network Time Protocol
(SNTP). To remove the authentication key for SNTP, use the no form of this command.
Syntax
sntp authentication-key number md5 value
no sntp authentication-key number
ƒ number — Key number (Range: 1 - 4294967295)
ƒ value — Key value (Range: Up to 8 characters)
Default Configuration
No authentication key is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example defines the authentication key for SNTP.