1 enable, 26 user interface commands, Syntax – Planet Technology WGSD-8000 User Manual

Page 337: Default configuration, Command mode, User guidelines, Example

User’s Manual of WGSD-1022/WGSD-8000

- 337 –

--------------- ------------

172.16.1.1 Connected 49 No Global

Global 1

Global values

--------------

TimeOut: 3

Source IP: 172.16.8.1

OOB Source IP: 176.16.8.1

5.26 User Interface Commands

5.26.1 enable

The enable user EXEC command enters the privileged EXEC mode.

Syntax

enable

[privilege-level]

privilege-level — Privilege level to enter the system. (Range: 1 - 15)

Default Configuration

The default privilege level is 15.

Command Mode

User EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example shows how to enter privileged mode:

Console> enable

enter password:

Console#