17 show sntp status, Examples, Syntax – Planet Technology WGSD-8000 User Manual
Page 194: Default configuration, Command mode
User’s Manual of WGSD-1022/WGSD-8000
- 194 –
Examples
Console# show sntp configuration
Polling interval: 7200 seconds.
MD5 Authentication keys: 8, 9
Authentication is required for synchronization.
Trusted Keys: 8,9
Unicast Clients Polling: Enabled.
Server Polling Encryption Key
----------- ----------- ----------------------
176.1.1.8 Enabled 9
176.1.8.179 Disabled Disabled
Broadcast Clients: Enabled
Broadcast Clients Poll: Enabled
Broadcast Interfaces: 1/1, 1/3
OOB SNTP servers
Server Polling Encryption Key
----------- ------------ ----------------------
10.1.1.91
Enabled 9
Broadcast Clients: Enabled
Broadcast Clients Poll: Enabled
Broadcast Interfaces: 1/1, 1/3
5.5.17 show sntp status
The show sntp status Privileged EXEC command shows the status of the Simple Network Time Protocol (SNTP),
Syntax
show sntp status
This command has no keywords or arguments.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode