Planet Technology WGSD-8000 - Manual (Page 178)

User’s Manual of WGSD-1022/WGSD-8000
- 178 –
Example
In this example, the MAC-layer address 66:66:66:66:66:66 is added to port g1.
console (config)# interface ethernet g1
console (config-if)# port security routed secure-address 66:66:66:66:66:66
5.4.13 show bridge address-table
The show bridge address-table privileged EXEC command displays all entries in the bridge-forwarding database.
Syntax
show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-number]
ƒ vlan — Specific valid VLAN, such as VLAN 1.
ƒ Interface — A valid Ethernet port.
ƒ port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
console# show bridge address-table
Aging time is 250 sec
vlan mac address port type
----- ------------------- ------ --------
1 0060.704C.73FF e8 dynamic
1 0060.708C.73FF e8 dynamic
200 0010.0D48.37FF e8 static