Planet Technology WGSD-8000 - Manual (Page 139)

User’s Manual of WGSD-1022/WGSD-8000
- 139 –
parameters refer.
• LAG, to which the specific LAG number the forwarding database
parameters refer. MAC Address, which displays the MAC
address to which the entry refers.
• VLAN ID Displays the VLAN ID number to which the entry refers.
• VLAN Name Which displays the VLAN name to which the entry refers
• Status Displays how the entry was created. The possible field values are:
• Permanent, the MAC address is permanent.
• Delete on Reset, the MAC address is deleted when the device is
reset.
• Delete on Timeout, the MAC address is deleted when a timeout
occurs.
• Secure, the MAC Address is defined for locked ports.
„ Query
• Port Specifies the interface is queried. There are two interface types from
which to select.
• Port, displays the specific port number.
• LAG, the specific LAG number.
• MAC Address Specifies the MAC address for which the table is queried. VLAN ID,
which specifies the VLAN ID for which the table is queried.
• Address Table Sort
Key
Specifies the means by which the Dynamic MAC Address Table is
sorted. The address table can be sorted by -
• VLAN
• Address
• Interface
Use the button to apply the static MAC address settings.
4.12.3 Dynamic Address
The Dynamic Address Table contains the MAC addresses learned by monitoring the source address for traffic entering the
switch. When the destination address for inbound traffic is found in the database, the packets intended for that address are
forwarded directly to the associated port. Otherwise, the traffic is flooded to all ports.
The Dynamic Address screen (see figure 4-70) contains parameters for querying information in the Dynamic MAC Address
Table, including the interface type, MAC addresses, VLAN, and table storing. The Dynamic MAC Address table contains
information about the aging time before a dynamic MAC address is erased, and includes parameters for querying and viewing