beautypg.com

Planet Technology WGSD-8000 User Manual

Page 101

background image

User’s Manual of WGSD-1022/WGSD-8000

- 101 –

It is to make the root port a fastest link. If all switches have STP enabled with default settings, the switch with the lowest MAC

address in the network will become the root switch. By increasing the priority (lowering the priority number) of the best switch,

STP can be forced to select the best switch as the root switch.

When STP is enabled using the default parameters, the path between source and destination stations in a switched network

might not be ideal. For instance, connecting higher-speed links to a port that has a higher number than the current root port can

cause a root-port change.

STP Port States

The BPDUs take some time to pass through a network. This propagation delay can result in topology changes where a port that

transitioned directly from a Blocking state to a Forwarding state could create temporary data loops. Ports must wait for new

network topology information to propagate throughout the network before starting to forward packets. They must also wait for

the packet lifetime to expire for BPDU packets that were forwarded based on the old topology. The forward delay timer is used to

allow the network topology to stabilize after a topology change. In addition, STP specifies a series of states a port must

transition through to further ensure that a stable network topology is created after a topology change.

Each port on a switch using STP exists is in one of the following five states:

Blocking

– the port is blocked from forwarding or receiving packets

Listening

– the port is waiting to receive BPDU packets that may tell the port to go back to the blocking state

Learning – the port is adding addresses to its forwarding database, but not yet forwarding packets

Forwarding

– the port is forwarding packets

Disabled

– the port only responds to network management messages and must return to the blocking state first

A port transitions from one state to another as follows:

From initialization (switch boot) to blocking

From blocking to listening or to disabled

From listening to learning or to disabled

From learning to forwarding or to disabled

From forwarding to disabled

From disabled to blocking