Planet Technology WGSD-8000 - Manual (Page 174)

User’s Manual of WGSD-1022/WGSD-8000
- 174 –
Examples
This example forbids port 1 to be a Forwarding-unregistered-multicast-addresses port within VLAN 8.
console (config)# interface vlan 8
console (config-if)# bridge multicast forward-unregistered add ethernet 1
5.4.7 bridge multicast forward-all
The bridge multicast forward-all interface configuration command enables forwarding of all multicast packets on a port. To
restore the default, use the no form of the bridge multicast forward-all command.
Syntax
bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-channel-number-list}
no bridge multicast forward-all
ƒ add — Adds ports to the group.
ƒ remove — Removes ports from the group.
ƒ interface-list — Separate non consecutive valid Ethernet ports with a comma and no spaces; a hyphen is used to
designate a range of ports.
ƒ port-channel-number-list — Separate non consecutive valid port-channels with a comma and no spaces; a hyphen is
used to designate a range of port-channels.
Default Configuration
Disable forward-all on all ports.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example all multicast packets on port e8 are forwarded.
console (config)# interface vlan 2
console (config-if)# bridge multicast forward-all add ethernet e8
5.4.8 bridge multicast forbidden forward-all
The bridge multicast forbidden forward-all interface configuration command forbids a port to be a forward-allmulticast port.
To restore the default, use the no form of the bridge multicast forward-all command.