Planet Technology WGSD-8000 - Manual (Page 176)

User’s Manual of WGSD-1022/WGSD-8000
- 176 –
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In this example the bridge aging time is set to 250.
console (config)# bridge aging-time 250
5.4.10 clear bridge
The clear bridge privileged EXEC command removes any learned entries from the forwarding database.
Syntax
clear bridge
This command has no keywords or arguments.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, the bridge tables are cleared.
console# clear bridge
5.4.11 port security
The port security interface configuration command locks the port. By locking the port, new addresses are not learned on the
port. To enable new address learning, use the no form of the port security command.
Syntax
port security [forward | discard | discard-shutdown] [trap seconds]
no port security