Planet Technology WGSD-8000 - Manual (Page 140)

User’s Manual of WGSD-1022/WGSD-8000
- 140 –
the Dynamic MAC Address table. The Dynamic MAC Address table contains address parameters by which packets are directly
forwarded to the ports. The Dynamic Address Table can be sorted by interface, VLAN, and MAC Address.
Figure 4-70 Dynamic Address screen
The page contains the following fields:
• Address Aging Specifies the amount of time (in seconds) the MAC addresses
remains in the Dynamic MAC Address table before it times out, if no
traffic from the source is detected.
The default value is 300 seconds.
• Clear Table If checked, clears the MAC address table
„ Query
• Port Specifies the interface for which the table is queried. There are two
interface types from which to select:
• Port - displays the specific port number
• LAG - displays the specific LAG number.
• MAC Address Specifies the MAC address for which the table is queried
• VLAN ID Specifies the VLAN ID for which the table is queried.
• Address Table Sort
Key
Specifies the means by which the Dynamic MAC Address table is
sorted by address, VLAN, or interface.