Preparing the food processor for use – KITCHENAID ARTISAN 5KFPM770 User Manual
Page 40
English
11
Preparing the Food Processor for Use
4. The 2-piece cone offers two sizes;
choose the right size for the fruit
you are juicing. Use the outer
cone for grapefruit, oranges and
other large fruits. Remove the
outer cone to reveal a smaller
inner cone that’s perfect for
lemons and limes.
5. Open the lid and place the cone
inside the strainer basket over
the power shaft. It may be
necessary to rotate the cone until
it falls into place.
6. Halve the fruit to be juiced.
7. Place fruit half on cone.
8. Close the lid of the strainer
basket. Hold the lever arm down
firmly with an open palm to
maintain even pressure. Operate
the citrus press only when the
lever arm is in the down position,
holding the fruit on the cone.
NOTE: Use of the citrus press
without the clip-on lever arm is not
recommended. If you do use it
without the lever arm, remove the
lever arm from the basket (see
Step 13).
9. Operate the citrus press by
pressing the “I” Button or the
“Pulse” Button.
10. When juice is fully extracted,
Press the “O” Button.
NOTE: Do not exceed the maximum
liquid level line on the work bowl, or
juice will leak from the bowl.
11. Unlock the strainer basket by
turning it clockwise. Remove
juiced fruit, cone, and strainer
basket from the work bowl.
12. Remove the work bowl from
Food Processor and pour juice
into desired container.
13. To detach the clip-on lever arm
from the strainer basket for
thorough cleaning, pull the clip
at the bottom of the basket
away from the basket side and
remove the lever-arm from the
basket.
14. When reattaching the lever arm
to the strainer basket, make sure
the tabs on the clip snap
securely into a pair of holes in
the bottom of the basket.