Kodak RFS 3570 - Manual (Page 72)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-16  Using the KODAK Driver for Adobe Photoshop (Macintosh) G
Set Auto Balance
7. (Optional) Set A UTO B AL . For most customers the A UTO B AL suggested
setting of “on” will automatically provide the proper “scene” balance.
However, you may need to turn off A
UTO
B
AL
for certain images such
as computer generated graphics or scenes with dominant colors. If
you change this setting, click V
IEW
C
HANGES
to see the effect of the
change.
NOTE: If the original prescan only needs fine color and/or brightness adjust-
ments, do not turn off A
UTO B AL ; instead, adjust color and/or brightness as
described in “Change Color Levels” and “Change Brightness” below.
Rotate the Image
8. (Optional) Click 90
°
CCW, 180
°
, or 90
°
CW to rotate the image 90
°
counterclockwise (CCW), 180
°
, or 90
°
clockwise (CW), respectively.
Click N
ORMAL
to display the image as it is oriented in the film or slide
holder.
Sharpen the Image
9. (Optional) Use the S HARPEN popup menu to adjust the level of edge
definition between image elements (pixels). Choose O FF , N ORMAL or
H
IGH
; H
IGH
provides the most definition. Later, when you click S
CAN
,
the time required to complete the scan will increase slightly if you
select N
ORMAL
or H
IGH
.
NOTE: There is no immediate response when a S HARPEN option is selected;
instead this choice takes effect later when you click P RE S CAN or S CAN .