Kodak RFS 3570 - Manual (Page 5)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v

Power-Cord Protection — Route power-supply cords so that they are
not likely to be walked on or pinched by items placed on or against
them; pay particular attention to cords at plugs, receptacles, and the
point where they leave the unit.

Operating Range — If the Scanner has been stored or transported
outside its operating ambient temperature range (refer to
“Appendix J — Specifications”), allow it to return to within its operat-
ing range before turning it on.

Lightning — For added protection of the equipment during a lightning
storm, or any time when you will leave the equipment unattended
and unused for long periods of time, unplug the unit from the power
outlet. This will protect the equipment from damage caused by
lightning or power-line surges.

Overloading — Do not overload power outlets and extension cords;
this can result in a risk of fire or electric shock.

Object or Liquid Entry — Never push foreign objects of any kind into
the equipment openings. Never spill liquid of any kind on the equip-
ment; contact Kodak for servicing if this occurs.

Servicing — Do not attempt to service the unit yourself, except to
change the fuse (see instructions in “Appendix E — Replacing the
Fuse”). Opening or removing covers may expose you to dangerous
voltage or other hazards.

Damage Requiring Service — Unplug the unit from the wall outlet
and refer all servicing to the manufacturer under the following condi-
tions. (Refer to “Appendix B — Warranty” for additional information.)
–
When the power-supply cord or plug is damaged (send cord
only). Power cords are available as a spare part; refer to
“Appendix I — Optional Equipment & Spare Parts List.”
– If liquid has been spilled or if objects have fallen into the equip-
ment.