Kodak RFS 3570 - Manual (Page 175)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Messages G D-1
“CALIBRATION
COMPLETE!
1. REMOVE the
CALIBRATION MASK.
2. INSERT appropriate
adapter for the desired
film holder.
3. INSERT desired film
holder, including film.
4. CLICK OK to
continue.”
The Scanner has com -
pleted its calibration. Follow the prompts in the
message to continue the scanning
process.
Appendix D — Messages from KODAK
Drivers
The KODAK Drivers add new messages to your software application. An
explanation of those added messages follows.
NOTE: If you do not find the message below, the message may have been
displayed by your software application; refer to the user’s manual for your
application for explanations of these messages.
Message Possible Cause(s) Suggested Solution(s)