Kodak RFS 3570 - Manual (Page 101)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Installation (Hardware & Software) — PC G 7-11
2. Locate the two identical SCSI ports and thin wire clamps on the back
of the Scanner.
Serial Number 2
SCSI ID
3 3570
-
BACK OF FILM SCANNER
Thin Wire Clamps
Two Identical SCSI Ports
3. Determine if the connected SCSI devices are terminated or not. The
Scanner is a non-terminated SCSI device. To do so:
A. First look for an external SCSI terminator on the devices; if you
find one, remove it.
B. Because some devices contain internal terminators, also check the
instructions for your devices to determine if they are terminated
internally.
NOTE: The Scanner does not have an internal terminator.