Kodak SCAN STATION A-61583 - Manual

January 2008 A-61583
Kodak Scan Station 100 Pre-installation Worksheet
It is recommended that you fill out this worksheet before installing the Kodak Scan Station 100. You will
need this information about your network to create an administrative configuration for your Scan Station
using the Configuration Organizer (provided with the Scan Station) and to complete the installation.
Research any information you are unsure of before creating the administrative configuration file. If you
have trouble filling out this worksheet, see the person who manages your network.
NOTE: This installation shows what you will need to install the Scan Station as of the date of this
document. As we improve our products from time to time, check the Kodak website
(http://www.Kodak.com/go/disupport) for the latest version.
Language Settings — found under the Settings button in the Configuration Organizer or
Administration GUI.
Parameter Name Description/Sample Your Setting Notes
Language Name of GUI/OCR language Default: English.
Device Settings — found under the Settings button in the Configuration Organizer or
Administration GUI
.
Parameter Name Description/Sample Your Setting Notes
Device Name NETBIOS name of the Scan
Station. The default is the Scan
Station’s unique serial number
(e.g., KSSXXXX-XXXX, where
X=the serial number) It is recommended that you do not
change this setting. Must be unique
(up to 15 characters) on the network/
subnet. You can leave this field
unchanged as ”Scan-Station” to
avoid overwriting an existing device
name. See Chapter 5, Scan Station
Administration Specifics for more
information.
IP Address Settings — Automatic
Automatic (DHCP) This is the default. If selected, the IP address, subnet
mask, and DNS server of the Scan
Station are set automatically by the
DHCP server.
IP Address Settings — Static
Static (IPv4)
• IP Address
Standard IPv4 address
(e.g., 192.0.0.1)
Scan Station’s IP address Complete this and the other
network sections only if you are
not using DHCP.
• Subnet Mask Scan Station’s Subnet Mask (e.g.,
255.255.255.0) Only these numbers are allowed: 0,
128, 192, 224, 248, 252, 254 and 255.
• Default Gateway IP of default gateway on the
network
• Preferred DNS
Server
IP of domain name Server #1 If this number is incorrect, you may
not be able to reach some network
locations.
• Alternate DNS
Server
IP of the alternate domain name
Server #2
• Preferred WINS
Server
IP of Windows Internet Name
Server #1