Kodak RFS 3570 - Manual (Page 133)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Using KODAK Drivers with Windows Applications — PC G 9-7
Operating the KODAK Driver
Follow the steps in this section to use the controls on the KODAK Driver
window.
NOTE: As you use the Scanner, the settings you have in effect each time you
leave the KODAK Driver are retained and will be in effect the next time you use
the driver.
Set the Film Type
1. Set the film type to match your film by choosing the film type from the
large number of choices on the F ILM drop down list box.
Set the Film Size
2. If the F
ILM
S
IZE
does not match the film you will scan, choose the
correct size from the F
ILM
S
IZE
drop down list box.
PreScan the Image (and Calibrate the Scanner)
3. Click P
RE
S
CAN
. When you have completed parts A through E of this
step, a color image of the photo currently in position will appear in
the KODAK Driver window. You can use this image to determine
whether additional adjustments are needed before final scanning. If
B & W is on (see below), the prescan appears in black-and-white.