Sun Microsystems Sun Fire X4200 - Manual (Page 92)

7-16 Sun Fire X4100 and Sun Fire X4200 Servers System Management Guide • December 2005
Type this command to add an SNMP v1/v2c user account:
create /SP/services/snmp/communities/
7.9.2 Deleting a User Account
Type this command to delete an SNMP v3 user account:
delete /SP/services/snmp/users/
Type this command to delete an SNMP v1/v2c user account:
delete /SP/services/snmp/communities/
7.9.3 Configuring User Accounts
Use the set command to configure SNMP user accounts.
7.9.3.1 Syntax
set target [propertyname=value]
7.9.3.2 Targets, Properties, and Values
These targets, properties, and values are valid for SNMP user accounts.
Target Property Value Default
/SP/services/snmp/communities/
communityname
permissions ro|rw ro
/SP/services/snmp/users/username authenticationprotocol
authenticationpassword
permissions
privacyprotocol
privacypassword MD5|SHA
ro|rw
none|DES
MD5
(null string)
ro
none*
(null string)
* If the privacyprotocol property has a value other than none, then a privacypassword must be set.