Sun Microsystems Sun Fire X4200 - Manual (Page 155)

Chapter 11 System Configuration Using the SP GUI 11-11
FIGURE 11-6 Web Server Settings Page
2. Select the HTTP or HTTPS web server:
■ To select an HTTP web server - Select Enabled from the drop-down list box. You
can also select Redirect HTTP Connection to HTTPS or select Disabled to turn
HTTP off.
■ To select an HTTPS web server - Click the HTTPS Web Server Enabled check
box.
The HTTPS web server is enabled by default.
3. Assign an HTTP or HTTPS port number.
4. Click Save for your settings to take effect.