Sun Microsystems Sun Fire X4200 - Manual (Page 168)

13-8 Sun Fire X4100 and Sun Fire X4200 Servers System Management Guide • December 2005
2. Click a radio button to select a user account to modify.
3. Click the Edit button.
The Edit User dialog box appears.
FIGURE 13-6 Edit User Dialog Box
4. To change the password:
a. Verify that the Change Password check box is selected.
b. Type a new password in the Password field.
The password must be at least 8 characters and no more than 16 characters. The
password is case sensitive. Use alphabetical, numeric, and special characters for
better security. You can use any character except a colon. Do not include spaces in
passwords.
c. Retype the password in the Confirm Password field to ensure that the password
is correct.
5. After you have changed the password, click OK.
A confirmation dialog box verifies that the user account was modified successfully.
The User Accounts page then is redisplayed.