Sun Microsystems Sun Fire X4200 - Manual (Page 54)

3-14 Sun Fire X4100 and Sun Fire X4200 Servers System Management Guide • December 2005
2. Type the following command to set the working directory.
cd /SP/network
3. Type the following commands to specify a static Ethernet configuration.
Note – The following values are samples only. You must specify the IP address,
netmask, and gateway appropriate for your ILOM Service Processor and network
configuration.
set pendingipaddress= 129.144.82.26
set pendingipnetmask= 255.255.255.0
set pendingipgateway= 129.144.82.254
set pendingipdiscovery=static
set commitpending=true
4. Log out of the ILOM SP.
3.5.4 Configuring ILOM With the Web GUI and an
Ethernet Connection
To set a static IP address for the ILOM SP using the web GUI, do the following.
1. Obtain the ILOM SP IP address from one of the following locations. Record the IP
address for future reference.
■ The system BIOS setup screen. Choose Advanced - IPMI 2.0 Configuration - Set
LAN Configuration - IP address.
■ Command-line interface. Log in to the service processor via the CLI and type the
command show /SP/network to display the IP address.
■ DHCP server log files.
2. Connect to the ILOM SP through a web browser running on a remote system.
3. Log in to the web GUI using the default user name, root, and the default
password, changeme.
4. Choose the Configuration tab and its Network tab to display information about
the current network configuration of your ILOM SP. See FIGURE 3-10 .
5. Click the Use the Following IP Address option. See FIGURE 3-10 .