Sun Microsystems Sun Fire X4200 - Manual (Page 75)

Chapter 6 Command Line Interface Reference 6-5
Display information about
SNMP private (read-write)
communities. show /SP/services/snmp/communities/private
Add this device to an SNMP
private community. create /SP/services/snmp/communities/private/ comm2
Delete this device from an
SNMP private community. delete /SP/services/snmp/communities/private/ comm2
TABLE 6-8 Host System Commands
Description Command
Start the host system. start /SYS
Stop the host system. stop /SYS
Reset the host system. reset /SYS
Start a session to connect to the
host console. start /SP/console
Stop the session connected to the
host console. stop /SP/console
TABLE 6-9 Clock Settings
Description Command
Set the service processor
clock to synchronize with a
primary NTP server. set /SP/clients/ntp/servers/1 address= ntpIPaddress
Set the service processor
clock to synchronize with a
secondary NTP server. set /SP/clients/ntp/servers/2 address=
ntpIPaddress2
TABLE 6-7 SNMP Commands
Description Command