Sun Microsystems Sun Fire X4200 - Manual (Page 171)

Chapter 13 Managing Users Using the SP GUI 13-11
13.5.2 What to Do
1. From the User Management tab, choose LDAP Settings.
The LDAP Settings page appears.
FIGURE 13-9 LDAP Settings Page
2. Complete the information in the LDAP Settings page.
Use the descriptions in the following table when completing the information.
TABLE 13-1 LDAP Settings Page Fields
Check Box or Field Description
State Select the Enabled check box to authenticate LDAP and local users.
Deselect the check box to authenticate only local users.
Default Role Select either Administrator or Operator.
IP Address Type the IP address of the LDAP server.
Port Type the port number used to communicate with the LDAP server.