Sun Microsystems Sun Fire X4100 User Manual
Sun fire
Table of contents
Document Outline
- Contents
- Preface
- Introduction to the Sun Fire X4100 and Sun Fire X4200 Servers
- Powering On and Configuring BIOS Settings
- 2.1 Powering On the Server
- 2.2 Powering Off the Server
- 2.3 Configuring BIOS Settings
- 2.3.1 Changing the Configuration of a BIOS Menu Item
- 2.3.2 BIOS Considerations
- 2.3.3 Descriptions of the BIOS Setup Screens
- 2.3.4 BIOS Setup Menu Screens
- 2.3.4.1 BIOS Main Menu Screen
- 2.3.4.2 BIOS Advanced Menu Main Screen
- 2.3.4.3 BIOS Advanced Menu CPU Configuration Screen
- 2.3.4.4 BIOS Advanced Menu IDE Configuration Screen
- 2.3.4.5 BIOS Advanced Menu SuperIO Chipset Configuration Screen
- 2.3.4.6 BIOS Advanced Menu ACPI Settings Screen
- 2.3.4.7 BIOS Advanced Menu ACPI Configuration Screen
- 2.3.4.8 BIOS Advanced Menu Event Logging Details Screen
- 2.3.4.9 BIOS Advanced Menu HyperTransport Configuration Screen
- 2.3.4.10 BIOS Advanced Menu IPMI Configuration Screen
- 2.3.4.11 BIOS Advanced Menu IPMI, View BMC Event Log Screen
- 2.3.4.12 BIOS Advanced Menu IPMI, LAN Configuration Screen
- 2.3.4.13 BIOS Advanced Menu IPMI, PEF Configuration Screen
- 2.3.4.14 BIOS Advanced Menu MPS Configuration Screen
- 2.3.4.15 BIOS Advanced Menu, AMD PowerNow Configuration
- 2.3.4.16 BIOS Advanced Menu Remote Access Configuration Screen
- 2.3.4.17 BIOS Advanced Menu USB Configuration Screen
- 2.3.4.18 BIOS PCI/PnP Menu
- 2.3.4.19 BIOS Boot Menu Main Screen
- 2.3.4.20 BIOS Boot Menu Boot Settings Configuration Screen
- 2.3.4.21 BIOS Boot Menu Boot Device Priority Screen
- 2.3.4.22 BIOS Boot Menu Hard Disk Drives Screen
- 2.3.4.23 BIOS Boot Menu Removable Drives Screen
- 2.3.4.24 BIOS Boot Menu CD/DVD Drives Screen
- 2.3.4.25 BIOS Security Settings Menu
- 2.3.4.26 BIOS Chipset Menu Main Screen
- 2.3.4.27 BIOS Chipset Menu NorthBridge Configuration Screen
- 2.3.4.28 BIOS Chipset Menu NorthBridge Memory Configuration Screen
- 2.3.4.29 BIOS Chipset Menu NorthBridge ECC Configuration Screen
- 2.3.4.30 BIOS Chipset Menu NorthBridge IOMMU Mode Screen
- 2.3.4.31 BIOS Chipset Menu SouthBridge Configuration Screen
- 2.3.4.32 BIOS Chipset Menu PCI-X Configuration Screen
- 2.3.4.33 BIOS Exit Option Menu Screen
- 2.4 Resetting SP and BIOS Passwords Using Jumper P4
- 2.5 Using the Force-Recovery Jumper P5
- 2.6 Using the Clear CMOS Jumper TP51/TP52
- 2.7 Using the Reset and NMI Switches
- 2.8 Updating the BIOS
- 2.9 Power-On Self-Test (POST)
- Maintaining the Sun Fire X4100 Server
- 3.1 Tools and Supplies Needed
- 3.2 Powering Off the Server and Removing the Covers
- 3.3 Locations of the Sun Fire X4100 Components
- 3.4 Replaceable Component Procedures
- 3.4.1 Replacing the Battery
- 3.4.2 Replacing a CPU and Heatsink
- 3.4.3 Replacing the DVD-ROM Drive
- 3.4.4 Installing a DVD-ROM Drive Upgrade Kit
- 3.4.5 Replacing a Fan Module
- 3.4.6 Replacing a Fan Connector Board
- 3.4.7 Replacing the Front Panel Indicator Board
- 3.4.8 Replacing the Front I/O Board
- 3.4.9 Replacing the Graphics Redirect and Service Processor (GRASP) Board
- 3.4.10 Replacing a Hard Disk Drive
- 3.4.11 Replacing a Hard Disk Drive Backplane
- 3.4.12 Replacing Memory Modules (DIMMs)
- 3.4.13 Replacing the Motherboard
- 3.4.14 Replacing PCI Cards
- 3.4.15 Replacing a Power Supply
- 3.4.16 Replacing the Power Distribution Board
- Maintaining the Sun Fire X4200 Server
- 4.1 Tools and Supplies Needed
- 4.2 Powering Off and Removing the Covers
- 4.3 Locations of the Sun Fire X4200 Components
- 4.4 Replaceable Component Procedures
- 4.4.1 Replacing the Battery
- 4.4.2 Replacing a CPU and Heatsink
- 4.4.3 Replacing the DVD-ROM Drive
- 4.4.4 Installing a DVD-ROM Drive Upgrade Kit
- 4.4.5 Replacing a Fan Module
- 4.4.6 Replacing a Fan Connector Board
- 4.4.7 Replacing the Front Panel Indicator Board
- 4.4.8 Replacing the Front I/O Board
- 4.4.9 Replacing the Graphics Redirect and Service Processor (GRASP) Board
- 4.4.10 Replacing a Hard Disk Drive
- 4.4.11 Replacing a Hard Disk Drive Backplane
- 4.4.12 Replacing Memory Modules (DIMMs)
- 4.4.13 Replacing the Motherboard
- 4.4.14 Replacing PCI Cards
- 4.4.15 Replacing a Power Supply
- 4.4.16 Replacing the Power Distribution Board
- 4.4.17 Replacing the Rear Fan Tray
- System Specs
- BIOS POST Codes
- Status Indicator LEDs
- Connector Pinouts
- D.1 USB Connector
- D.2 Serial Connector
- D.3 10/100BASE-T Connector
- D.4 10/100/1000BASE-T Connector
- D.5 VGA Video Connector
- D.6 Serial Attached SCSI Connector
- D.7 Flex Cable Motherboard Connector
- D.8 Flex Cable Power Distribution Board Connector
- D.9 Flex Cable DVD-ROM Drive Connector
- D.10 Motherboard Bus Bar Power Connector
- D.11 Front I/O Interconnect Cable Connector
- D.12 Power Supply Connector
- D.13 Fan Module Connector
- Serial Attached SCSI BIOS Configuration Utility
- E.1 Fusion-MPT SAS BIOS Overview
- E.2 Starting the SAS BIOS Configuration Utility
- E.3 Configuration Utility Screens
- E.3.1 User Input Keys
- E.3.2 Adapter List Screen
- E.3.3 Global Properties Screen
- E.3.4 Adapter Properties Screen
- E.3.5 SAS Topology Screen
- E.3.6 Device Properties Screen
- E.3.7 Device Verify Screen
- E.3.8 Advanced Adapter Properties Screen
- E.3.9 Advanced Device Properties Screen
- E.3.10 PHY Properties Screen
- E.3.11 Integrated RAID Configuration and Management Screens
- E.4 Performing RAID Configuration Tasks
- Index